Sensory Step

BJ-EMSST

Open all sections
Print user manual
Versions of this product: SHX Mat
  • It’s highly recommended to read the entire manual before start using this product.
  • The SHX Mat should be always used under adult supervision.
    Never use abrasive products on the fabric (ammonia, acetone, bleach, etc)
  • In case of contact with liquids, dry the surface immediately to avoid wetting the interior. The seams are not waterproof
  • Don’t let the cable be pressed with heavy or sharp elements.
  • It’s recommended to hide the cable to avoid its damage, also to avoid being obstacle in the room.
  • Remove the wrapping from the SHX carpet trying to using appropiate tools to don’t damage the fabric. Discard the packaging responsibly.
  • If you find any damage or any of parts missing when unpacking, please contact BJLive! +34 (93) 2850437 for assistance. Any breakdown or breakage during transport must be notified within three days of receipt.
  • The SHX carpet is designed for use on floors on stable, clean and dry surfaces, not to be used on other surfaces or environments.
  • Dimensions: 97 x 80 x 4 cm
  • Weight: 1Kg
  • Power supply and battery charging: 5V/1000mA USB charger (5.5×2.1mm connector).
  • 700mAh Lithium Polymer battery.

Fabrics:

The vinyl fabric used to manufacture the products meets the following requirements

  • Microbial tested resistance
  • Bacterial tested resistance
  • Fungal tested resistance
  • Abrasion tested resistance
  • Perspiration and human saliva tested resistance
  • Urine tested resistance
  • Blood tested resistance
  • Total weight: 620 g/m2
  • Thickness: 0.5 mm to 1 mm
  • Meets the REACH regulation
  • Fireproof material classification m2
  • Complies with EN71-3 Toy Safety
  • Excellent resistance to sun exposure

Sensory Step is a wireless colored mat that allows you to control your multi-sensory room and all the light devices you have in it, both individually (one by one) or in combination (all at once).

This mat serves both to control all our light devices (Luminea) individually, as well as to change all the devices of the room at the same time, including the audiovisual scenes included in the SHX System. Being wireless makes it very easy to include it in your sensory room whenever you want as it does not require a complicated installation.

 

Components

 

  • The battery should be fully charged before the first use. See the “Battery charge and care” section of this manual. Take out the electronic box from the foam to use it.
  • Turn on the Controller (see Turn ON and OFF section). Access to the electronic box unzipping the Velcro at the top of the Sensory Step.
  • Select the function mode (see Configuration section)
  • Close the Sensory Step zipping the Velcro
  • Press one of the 6 buttons of the Sensory Step to activate each function.
  • Press and hold the Configuration button during 3s (until the green Led indicator beside the charge connector, flashes 3 times), to turn ON the mat.

  • If the mat is ON, press and hold the Configuration button during 3s (until the red led indicator flashes 3 times) to turn OFF the device.

Sensory Step can be configured in five different modes.

To change the control mode, press and release the Device button. The display will show you the function mode:

Press the “Configuration button” to select the device to be controlled:

  • Mode S. : for controlling SHX sensory rooms
  • Mode A. : Luminea tube
  • Mode B. : Luminea fiber optic strands
  • Mode C. : Other Luminea elements (LED line, second tube or fiber optic device, ball pit, planet).
  • Mode: all the Luminea devices at the same time (A, B and C).

The first time it is pressed, the current function number will be displayed.  Scroll through the remaining functions by continuing to press the button.

After a short period of inactivity, the display will shut off to reduce power consumption.

If the Sensory Step is turned off, the middle led line turns red if you press the Device button.


1.   Select the desired operating mode.

2.   Press one of the 6 buttons of the Sensory Step to activate each function.

 

A. Direct control of Luminea devices:

When you have selected the relevant Luminea control mode; A, B, C, , you will be able to change the colour of the Luminea device pressing the buttons of the Sensory step.

 

B.      SHX mode:

At SHX Control mode, the device allows you launch the 6 first buttons programmed in a scene of the SHX program.

 

Once the Startup has been done:

  • Select the scene on the SHX software which you want to work with.
  • Step on the button of the carpet you want to activate. Each button has its own programmed cell on the different scenes of the SHX software (see image bellow):

  • The battery needs charging when the LED on the remote flashes red.
  • The electronic unit  must either be connected to the USB charger and cable provided with the product or to another similar device: 5V-1000mA.
  • The charging LED will be red while the battery is being charged. Once the battery is fully charged, the LED will turn green.
  • It may take between 2 and 3 hours to charge the battery, depending on it the charge level.

Keep in mind that:

  • The battery in the electronic unit is a single cell lithium ion/ polymer battery. The battery will slowly lose its charge even if the device is not in use. Depending on how long the product has been stored prior to delivery, the battery may be dead. In this case, charge the battery fully before use.
  • Lithium ion/ polymer batteries do not withstand high temperatures. Avoid exposing the Sensory Step to sources of direct heat such as radiators, electric blankets, heaters etc.
  • Do not leave the product unattended while charging. This is important in order to detect any irregularities during the charging process.
  • While the battery can be charged and discharged numerous times, it will eventually need to be replaced. It must be replaced when it lasts noticeably less than usual. Please contact BJLive! for a replacement.
  • Lithium ion/ polymer batteries do not have a memory effect. Therefore, they can be charged before they are fully drained. It is advisable to avoid charging the battery again before it has lost 5% of the charge, in order to reduce the risk of damage due to unnecessary temperature increases. Brief, repeated charging and draining may produce inconsistencies between the battery charge level and the power monitor readings.
  • To turn the power supply off correctly, disconnect the outlet cable from the charger/power unit. Lastly, remove the power cable from the device itself.
  • The inverse is recommended for connecting the power supply.
  • When disconnecting the charger or an accessory, hold and pull the plug, not the cable.
  • Disconnect the charger from the power supply and the device when not in use.
  • Do not use the charger outdoors.
  • If the battery or charger appears damaged in any way, please contact BJLive! to request a check before continuing to use them. Never use damaged chargers or batteries
  • Clean the surface of the SHX Mat regularly to maintain maximum visual effect and good hygiene.
  • Before cleaning, disconnect the USB charger.
  • Clean using soapy water and a soft cloth (wrung out).
  • Never use chemical or abrasive products for cleaning.
  • Carefully dry the surface and do not reconnect until after one hour.
    Periodics inspections

IMPORTANT: The product must be always used under adult supervision.

It’s recommended to do a periodic inspection, in case of detecting any anomaly, contact immediately BJLive! for assistance.

The buttons activated on SHX Mat, do not correspond with the ones on to SHX app on the tablet:

If the activated content on SHX Mat with the ones on the current scene on the SHX Tablet, Check the app settings on the tablet:

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with the requirements indicated in the European Directive 2014/30/EU.

If you find any damage or any material is missing please contact our technical service for assistance.

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, España
Fono: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@bjliveat.com
www.bjliveat.com

Any damage or breakage caused during transport must be notified within three days of receipt.