Connection USB: Type C 5V / 100mA
Salida vibración: Speakon connector
Min impedance: 4ohm
Audio In/Out: Jack 3,5mm stereo connector
Processor: i5 6400 Quad core @ 2.70 GHz
RAM: 8GB DDR4
Video output: DVI-D, HDMI
Integrated wireless connectivity: 1 Dual Band 802.11ac
Main hard drive: 240 Gb
Operating system: Windows 10 pro 64 bits
a) Power on:
b) Power off
a) USB connection:
Connect the device to a computer using the supplied USB cable.
b) Installing SHX software on the PC:
Install on your computer the SHX.exe file found in the USB memory that has been supplied.
Copy the “BJCSHX” content folder that is also found in the USB memory to your computer.
The SHX Device vibration amplifier allows the connected elements to vibrate to the rhythm of the music, allowing users to feel the music in the body.
a) Vibroacoustic element connection:
b) Audio signal connection:
** It is necessary to add a Jack – RCA cable
1- Start up the sound player (PC, MP4 …). Adjust the sound volume of the player so that the level is adequate.
2- Adjust the vibration level from the SHX Device using the volume adjustment potentiometer.
Adjust only for vibration.
(The audio output signal is independent of this setting)
The SHX Device Lite allows the control of several independent lighting elements via DMX. This allows changing the colors and regulating the intensity of the lighting depending on the activity, according to the ambient sound or the projected images.
The lighting elements are controlled by DMX connections. It is necessary that the lighting elements have this type of connection.
All lighting elements must be connected to each other, using DMX cables (included).
The elements are controlled from the “Control” tab icons.
This device allows you to receive orders from different elements of the room to wirelessly activate the contents configured in the SHX software. For example: SHX Dice, Button 6, etc.
Mount the antennas and make sure they are not close to sources of interference.
From the wireless elements you can activate the software boxes. Each button activates a box on the selected tab.
The contents of the SHX software can be activated using switches.
Connect a switch (for ease of use we recommend that it be wireless) to the control inputs according to the desired function.
There are 6 direct inputs that activate the first 6 cells of each tab.
Scan: When activating this input, the scanning of the different cells of the active tab begins. A second activation will start the content of the selected cell.
Random: With each activation, a cell of the active tab is started randomly.
Sequential: With each activation of the input, the different cells of the active tab are organized in an orderly manner.
From this device, you can control elements of the environment that already have remote controls, for example: Projector, TV. Using the SHX software you can memorize buttons of other remote controls to activate these elements from the SHX software.
The SHX software allows to memorize the “IR function” of any command, facing the command towards the IR REC identifier.
Consult the SHX manual to integrate this function in a tab or scene.
Activating the programmed box will turn on the device that until now controlled the infrared control.
The following message appears in the SHX software:
‘Please connect the Central Device and restart the application’
This message appears when the computer does not detect the device. Review the following steps (section 2 of this manual):
The vibration is not noticeable:
The lighting elements do not respond:
To verify operation, it is better to connect a single lighting element directly to this device.
If the item that has been tested in the previous sections works correctly, add the other elements of the installation one by one and:
The SHX Effects radio frequency receivers (BJ-234 Enabler Socket +) do not respond:
The device does not respond to wireless controls:
Switch inputs do not respond:
Infrared controlled elements do not respond:
If you find any damage or any material is missing please contact our technical service for assistance.
Any damage or breakage caused during transport must be notified within three days of receipt.