• IMPORTANT: The product must always be used under adult supervision.
  • Before throwing the dice, make sure the zipper is completely fastened.
  • The foam filling could be a risk of suffocation.
  • Do not throw the SHX Dice at people. Its size and weight may cause injuries.
  • To maintain the Dice in optimum conditions, avoid strong impacts and exposure to sharp or pointed objects.
  • Do not keep the charger inside the SHX Dice.

Medical devices

  • Radio equipment can interfere with the functioning of medical devices that are not suitably protected. Consult a physician or the manufacturer of the medical device to determine whether it is adequately shielded from external radio frequency energy. 

Implanted medical devices

  •  Manufacturers of medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless device and an implanted medical device such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should:
  • Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.
  • Not carry the wireless device in a breast pocket.
  • Move the wireless device away if there is any reason to suspect that interference is taking place.
  • Follow the manufacturer directions for the implanted medical device.
  • If you have any questions about using the wireless device with an implanted medical device, consult your doctor.

Operating environment

  • Other products that use the same frequency band (433 MHz) as this remote control can interfere with the control of the receivers. Make sure that neither the remote nor the receivers are located near these sources.

Potentially explosive environments

  •  Do not use the device in any area with a potentially explosive atmosphere. Follow the instructions.

Power supply and battery charging: 5V/1000mA USB charger.

Dice dimensions: 45 cm x 45 cm x 45 cm.

Electronic unit dimensions: 15cm x 15cm x 15cm.

2400mAh Lithium Polymer battery.

Fabrics:

The vinyl fabric used to manufacture the products meets the following requirements

  • Microbial tested resistance
  • Bacterial tested resistance
  • Fungal tested resistance
  • Abrasion tested resistance
  • Perspiration and human saliva tested resistance
  • Urine tested resistance
  • Blood tested resistance
  • Total weight: 620 g/m2
  • Thickness: 0.5 mm to 1 mm
  • Meets the REACH regulation
  • Fireproof material classification m2
  • Complies with EN71-3 Toy Safety
  • Excellent resistance to sun exposure

Foams:

The polyurethane foam and polyethylene foam are normalized to meet the highest standards of European legislation, both technically and environmentally.

Introduction

  • The SHX Dice allows the SHX software content to be accessed by activating the different functions within the selected scene.  Each side of the dice activates a different function.
  • Remove packaging avoiding  damaging or cutting the SHX Dice. Please dispose of the packaging responsibly.
  • If you detect any damaged or missing parts, please contact BJLive! immediately on +34 93 2850437. Any damage caused during transport must be notified to the manufacturer within three days of delivery.
  • The materials used to make the SHX Dice are:
    • Fabric cover foam filling
    • Electronic position sensor unit
    • USB charger.

Instructions for use

To turn the SHX Dice on, unzip the cover, gently adjusting it to avoid forcing the zipper slider.

Once open, remove the foam filling of the electronic unit.

The battery should be fully charged before the first use. See the “Battery charge and care” section of this manual.

Once the battery has been charged, move the ON/OFF switch to the (| -on) position. Wind up the charging cable and place it on top of the electronic unit. Replace the foam filling and zip up the Die, taking care not to catch the cover in the zipper.

When the Die is switched on, the pre-loaded SHX software function in the side facing upwards will be automatically activated.

The SHX software function that is activated on each side of the box is as follows:

  • Red: function 1
  • Green: function 2
  • Yellow: function 3
  • Blue: function 4
  • Orange: function 5
  • Light green: function 6

 

 

The selected function will only be activated approximately 3 seconds after the Die has come to a standstill.

After use, we recommend switching the ON/OFF button to the 0 position to prolong the battery life.

  • Clean the surface of the SHX Die regularly for hygiene reasons and to ensure optimum visual effects.
  • It must be disconnected from the power supply before cleaning.
  • Clean using soapy water and a soft, damp cloth. Do not clean with harsh chemical or abrasive products. Dry the surface thoroughly.

 

Periodical maintenance

  • Check that the charging cable is intact and undamaged. Check the cover to prevent any damage or tearing.
  • Check that the electronic unit is intact and undamaged. If the unit has been removed from the foam, replace it as in the image below:

                                                                     

IMPORTANT: Switch the ON/OFF button to the (| -on) position in order to charge the battery.

The electronic unit cable must either be connected to the USB charger provided with the product or to another similar device: 5V-1000mA.

The charging LED will be red while the battery is being charged. Once the battery is fully charged, the LED will turn green.

It may take between 4 and 5 hours to charge the battery, depending on it the charge level.

 

Keep in mind that:

  • The battery in the electronic unit is a single cell lithium ion/ polymer battery. The battery will slowly lose its charge even if the Die is not in use. Depending on how long the product has been stored prior to delivery, the battery may be dead. In this case, charge the battery fully before use.
  • Lithium ion/ polymer batteries do not withstand high temperatures. Avoid exposing the Die to sources of direct heat such as radiators, electric blankets, heaters etc.
  • Do not leave the product unattended while charging. This is important in order to detect any irregularities during the charging process.
  • While the battery can be charged and discharged numerous times, it will eventually need to be replaced. It must be replaced when it lasts noticeably less than usual. Please contact BJLive! for a replacement.
  • Lithium ion/ polymer batteries do not have a memory effect. Therefore, they can be charged before they are fully drained. It is advisable to avoid charging the battery again before it has lost 5% of the charge, in order to reduce the risk of damage due to unnecessary temperature increases. Brief, repeated charging and draining may produce inconsistencies between the battery charge level and the power monitor readings.
  • To turn the power supply off correctly, disconnect the outlet cable from the charger/power unit. Lastly, remove the power cable from the device itself.
  • The inverse is recommended for connecting the power supply.
  • When disconnecting the charger or an accessory, hold and pull the plug, not the cable.
  • Disconnect the charger from the power supply and the device when not in use.
  • Do not use the charger outdoors.
  • If the battery or charger appears damaged in any way, please contact BJLive! to request a check before continuing to use them. Never use damaged chargers or batteries

If the system doesn’t respond follow the next guide.

To make sure the issue is not related to the current scene, test it in different scenes:

The buttons that are being activated with the  SHX Dice do not correspond to the scene on the tablet:

Check the following settings on the tablet:

Correct disposal of this product

  • At the end of their life, this product and its electronic accessories (e.g. charger or USB cable) should not be disposed of with other household waste.
  • To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources
  • Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Correct disposal of batteries in this product

  • The batteries should not be disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
  • To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
  • Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Recycle when possible. Do not dispose as household waste.
  • Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. If a battery leaks, do not let battery liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, or seek medical help.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with EU 2004/108/EC Directive requirements .

Declaration of conformity can be downloaded by clicking on the following link: BJ-256-257-258-EX21_conformidad.pdf

If you find any damage or any material is missing please contact our technical service for assistance.

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, España
Fono: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@bjliveat.com
www.bjliveat.com