Vibroacoustic Bluetooth Kit

BJ-KVSL

Open all sections
Print user manual
  • It’s highly recommended to read first the entire manual before start using this device.
  • The product must be used only
  • under adult supervision
  • The correct use and supervision of this equipment guarantees a long-live performance.
  • Remove the wrapping of the different elements from the vibroacoustic amplifier, save them until you check all the elements work correctly
  • The heat generated by this unit needs good ventilation. Make sure the air vents of the cabinet are not covered at anytime.
  • The device should not be used outdoors or in humid environments.
  • Do not disconnect the device from the wall plug with wet hands.
  • Immediately disconnect the mains plug from the mains socket if:
        1. there is visible damage to the unit or to the mains cable.
        2. a defect might have occurred after a drop or similar accident.
        3. there are malfunctions.
  • The unit must in any case be repaired by skilled personnel.
  •  

Vibration amplifier

Power supply: . . . . . . . . . . . 230 V~/50Hz
Power consumption: . . . . . . . . . . . . . . máx. 730 VA

Rated output power
Stereo 4Ω: . . . . . . . . . . 2 × 200WRMS
Stereo 8Ω: . . . . . . . . . . 2 × 125WRMS

Acoustic amplifier

Device type: multimedia speakers

Number of speakers: 3

Frequency response: Subwoofer 50 Hz- 130 Hz, Satellites: 160 Hz- 20Khz.

Total power: 150 W

Introduction

 

Add sound and vibration to your sessions

Thanks to this kit, you can make the vibroacoustic elements you have in your room vibrate at the rhythm of your preferred music. For a more immersive experience, you can also combine the vibration and the sounds with the Luminea devices of your room, flowing all at the same rhythm.

Pair this kit to any tablet or mobile device through Bluetooth to amplify the music played on your device. The sounds will also turn into a vibroacoustic signal, which will make vibrate your vibroacoustic elements in unison.

By using this kit with any vibroacoustic element from our catalog, such as a vibroacoustic transformable pouf, a vibroacoustic water bed, a vibroacoustic cushion, or others, you can add vibration to the therapeutic sessions for a more intense sensory experience. The user will hear the music but also feel it running through his body.

Use this incredible effect to activate or relax users according to the therapeutic objectives of your session.

 

Components:

1. Low frequencny aplifier for up to 2 vibroacoustic elements + power cable 

2. Pre-amp stage + power supply

3. Powered Speakers

 

4. Bluetooth receiver + power supply

5. Wiring

 

Three 230V power socket must be available for the amplifier,  the pre-amplifier stage and the speakers

Connect the different elements following the next diagram:

Conexions:

Bluetooth receiver

Connect the Bluetooth receiver to the audio input of the preamplifier stage. Connect the power supply of the Bluetooth receiver to the mains.

Other audio sources (eg MP4 player, PC, etc.) can also be connected to the AUDIO IN input instead of the Bluetooth receiver

Acoustic amplifier

  • Connect the acoustic amplifier according to the scheme below
  • The speakers must be connected to the AUDIO OUT of the preamplifier stage.

The external volume adjustment accessory can also be connected:

7- Headphone jack. 8 – IN. 9- OUT. 10 – IN. 11- Volume

 

 

 

Vibration amplifier

  • Connect the vibro output of the preamplifier stage to the signal input of the vibration amplifier:

  • Connect the vibroacoustic elements to the vibro outputs of the amplifier:

  • To connect the cable, insert and turn the connector into the input, so that the connection is secure.

* The amplifier has 2 vibro outputs.

Once the different elements have been connected to each other, each of them must be connected to the power supply:

  • Connect the power supply of the pre-amplifier stage (12Vdc)
    Connect the power supply of the Bluetooth receiver (5Vdc)
    Connect the power cable of the speakers (230Vac).
    Connect the power cable of the vibration amplifier to 230Vac power)

 

Start up

  • Turn on the vibration amplifier switch
  • Turn on the power switch for the speakers.
  • Pair a Bluetooth player (tablet, mobile, etc.) with the Bluetooth receiver.
    • From the Bluetooth player, turn on the bluetooth function.
    • From player settings, find the receiver (it should appear as TP-LINK).
    • Press the option to connect device.

IMPORTANT:  The volume on the sound player (tablet, mobile, etc.) should be adjusted to the appropriate level (maximum volume is recommended).

 

Vibration regulation

The amplifier allows the vibration intensity to be adjusted. The vibration level should be adjusted via the controls on the front, particularly via the CH.A control (or CH.B if there is a second vibroacoustic element).

WARNING!

  • Keep the CH.B control on minimum when only one vibroacoustic element is used.
  • When the vibration level is adjusted, if the “CLIP” indicator is permanently ON (red LED) lower the setting immediately until the indicator turns off

IMPORTANT! Not following these indications can lead to the malfunction of the vibroacoustic amplifier.

 

Acoustic regulation

On the rear of the subwoofer you have the sound settings. It has a general volume setting and a bass volume setting.

If you have used the external volume control accessory, you can adjust it directly with the accessory.

  • Before cleaning, disconnect the equipment from the wall plug.
  • Clean using soapy water and a soft cloth (wrung out).
  • Never use chemical or abrasive products for cleaning.
  • Carefully dry the product and do not power it until it’s completely dry.
  • Make sure the ventilation openings are free of dust to ensure proper ventilation of the device.
  • It is recommended a periodic inspection of the devices, in case of detecting any anomaly disconnect the device from the current and immediately contact your supplier for assistance.

Electrical products should not be disposed of with household waste.

  • Dispose of the product at an electronic waste collection point or your specialist distributor. 
  • Place the packaging material in the cardboard, paper and plastic recycling bins.
  • To avoid possible damage to the environment or human health that represents the elimination of this kind of waste, separate these products from other types of waste and reciprocally correct. In this way, the sustainable reuse of material resources will be promoted.
  • Private users can contact the establishment where they purchased the product or the relevant local authorities to find out how and where they can take it to an ecological and safe recycling.
  • Within the term of legal guarantee we undertake to rectify for free by means of repair or replacement the defects of the product derived from defective materials or manufacturing defects.
  • Any unauthorised alteration or modification of the product will void this warranty.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with EU 2004/108/EC Directive requirements .

Declaration of conformity can be downloaded by clicking on the following link: bjliveat.com

If you find any damage or any material is missing please contact our technical service for assistance.

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, España
Fono: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@bjliveat.com
www.bjliveat.com

Any damage or breakage caused during transport must be notified within three days of the reception