• It’s highly recommended to read this manual before start using the device.
  • The product should always be used under adult supervision.
  • It is recommended a periodic inspection of the fibers to detect breaks in the fiber strips, in which case the complete mallet should be replaced.
  • The fiber optic is designed to create an optical effect and users can gently touch and twist it. Even so, it should never be placed in the mouth, biting, stretching, knotting, use as a rope to tie hands or feet, sit on top of the mallet, use as a whip or submerge it in water. There is a risk of strangulation.
  • DO NOT cover the ventilation holes.
  • To avoid eye damage, do not look directly at the lens of the light source.
  • This product is designed for indoor use only.
  • People prone to epileptic seizures should consider the effects of this  lights effect can have on them.
  • Be careful with the cables of the product. If you detect a defect in a cable, disconnect the device from the power supply and contact technical support.
  • The product is designed to create a visual and sensitive effect, so it should never be shaken, tipped or hit with hard objects.
  • Power supply ……………………………. 5V, 2A
  • Power ……………………………………… 12W
  • Longitud de las fibras …………………. 2m
  • Lightsource dimensions ……………… 180x80x50mm.
  • DMX cable length ……………………… 6m


The fibre optic cascade amazes us with its lighting effect, whether we are sitting or standing. It stimulates proprioception and body awareness. Contact with the optical fibres helps us to perceive different parts of our body. Ideal for learning cause and effect, recognizing colors and activities that encourage communication.

Supplied with 2 metres long, light source and ceiling mount.

It is the fibre optic cascade that is used for rooms with the SHX System, and offers unlimited control options using any of the SHX elements: choose any color or even change the color of the tube using your voice or depending on the color of the image being projected.


  • Lightsource (1).
  • Lightsource Power supply (2).
  • 6m DMX cable (3).
  • 2m Fibre optic courtin (4).
  • Ceiling washers (5).
  • Allen key for the assembly of the fibre

1.                             2.                            3.

                                   4.                                           5.  2m 

  • A 230V socket must be provided for the power supply of the device.
  • A DMX connection must be provided for lighting control (female DMX connector).
  • In case of need to control more lighting elements, a second DMX connection must be provided to ensure continuity to the signal (male DMX connector).

Hold the curtain to the ceiling:

Necessary elements  for assembly:

For the assembly of the device you will need the following items not included with the product:

For fastening the curtain:

  • 2x fixing block (6mm). Make sure that the plugs are suitable for the mounting surface.
  • 2x screws

For fastening the light source:

  • 4x fixing pad (6mm). Make sure that the plugs are suitable for the mounting surface.
    4x screws
  • Locate the curtain on the ceiling and mark the two points of the washers (the fixing washers should be about 20cm from each end).
  • Fix the two washers on the ceiling, taking into account that the opening must be at the bottom.

  • Once fixed, insert the fiber bundle through the washer farthest from the wall where the light source will be installed, and then pass the curtain through the first washer
  • Pass the fiber bundle through the second washer, and then the curtain
  • Fix the position of the curtain on the washers with the side screw


Fixing the light source on the wall / ceiling:

  • Fix the light source on the ceiling / wall by screwing the four holes of the perimeter of the light source.
  • Ensure that the fiber bundle can be connected with ease


Assembly of the fibres:

  • Insert the connector of the fiber bundle into the receptacle of the light source until it comes to a stop, once inside, fix it with the screw and the key provided for that purpose.



The light source comes preconfigured to be controlled by the SHX system although it is possible to configure it for use in passive mode where the fiber changes color by melting the RGB colors with a smooth and slow transition, here are the steps to make it work in any of the two modes.

SHX mode 

For use with the SHX system, the DMX cable must be connected to the DMX IN connector. This cable must be connected to the rest of the DMX bus of the installation. In the event that this element is the last of the entire installation, the bus terminator should be connected to the DMX OUT (this terminator is supplied in the SHX Central Device). If you must continue the DMX signal to another device, you must connect the DMX cable to the DMX out connector.

Likewise, the DMX address must be configured using the microswitches as shown in the figure (address 384):


Pasive mode

For use in passive mode the microswitches must be configured as follows:


Alimentar el equipo

Por último se debe alimentar la fuente de luz. Por un lado se debe conectar el alimentador a la fuente de luz como se muestra en la figura y por el otro lado se debe conectar el alimentador a la corriente eléctrica.


Before start using the device
Check the following points:

  • The device must be connected to a wall plug.
  • The DMX cable must be connected to the device.
  • The SHX Central device must be switched on.

Use of the product

  • In the SHX software you can control the lights of the device.
  • In the SHX app, you will also find a tab that allows you to change the colors of the device: you can choose between different colors or activate the function of automatic color changes.

  • In the SHX application there’s a power off button, you can turn off the device with it.
  • You can configure the different contents of the SHX application as well, to create the effects you want to associate with that content. See the manual of the SHX application to learn how to create these contents, (automatic mode, according to the SHX scenes, by sound, simultaneous with the other elements or independent)

The control of this device has been added to the SHX application.
The configuration parameters for this device are:

Lighting control:

  • DMX address: 384

In the SHX application it has been created within the DMX devices with the following configuration:


  • Disconnect the device from the electrical power before cleaning
  • Use a soft cloth moistened in soapy water to clean the product.
  • Do not use abrasive products.
  • Dry the product before connecting it to the current
  • Do not connect the device if liquid has entered inside
  • Don’t cover the ventilation of the lightsource, and keep them clean to avoid overheating

Strands maintenance:

  • It is recommended a periodic inspection of the fibers to detect breaks in the fiber strips, in that case, the complete mallet should be replaced.
  • The fibers must be cleaned on a regular basis
  • DO NOT immerse the fibers in water or another liquid.
  • For cleaning, the fiber bundle must be separated from the light source by loosening the fixing screw.
  • Clean the fibers using soapy water and a soft cloth.
  • Clean from the fiber connector towards the end with a smooth movement from top to bottom.
  • Thoroughly dry the fibers and do not reconnect in the light source until after one hour.
  • For a basic troubleshooting of DMX devices follow the next steps:

  • When a DMX device is affecting the well functioning of other devices on the DMX bus, follow the next steps to identify wheater if a device is faulty or the issue is related to the cable used to connect all the devices.


  • To avoid possible damage to the environment or human health that represents the uncontrolled disposal of waste, separate these products from other types of waste and recycle them correctly. In this way, the sustainable reuse of material resources is promoted
  • Private users can contact the establishment where they purchased the product or with the relevant local authorities to find out how and where they can take it to be subjected to environmentally friendly and safe recycling.

Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.

Any unauthorised alteration or modifications to the product will void this warranty.

This product complies with EU 2004/108/EC Directive requirements .

Declaration of conformity can be downloaded by clicking on the following link: bjliveat.com

If you find any damage or any material is missing please contact our technical service for assistance.

BJ Adaptaciones
C/ Mare de Déu del Coll, 70, Bajos
08023 Barcelona, España
Fono: +34 93 285 04 37
Fax: +34 93 553 56 34
e-Mail: info@bjliveat.com

Any damage or breakage caused during transport must be notified within three days of receipt.+¡